Your bill
Recent electricity use gives us the first system-size range.
Residential rooftop solar
A useful first review
No standard package fits every terrace. We begin with the information that changes the design.
Recent electricity use gives us the first system-size range.
Shade, water tanks, access and structure decide the usable area.
Meter type and DISCOM details determine the application route.


Indicative pricing
Planning figures for a typical Gujarat rooftop, not a quotation. Installed price falls as the system gets bigger, and the central subsidy is capped at ₹78,000 from 3 kW upward. Your figure depends on the roof, the structure and the meter.
Modelled at 4.4 units per kWp per day and ₹7.5 per displaced unit — below the all-in residential rate, because domestic tariffs are telescopic and fixed charges continue whatever the roof makes. Subsidy is released after installation and DISCOM verification. Figures are indicative and subject to applicable government regulations, tariff structure, project conditions and tax treatment.
Housing societies and RWAs
Lifts, pumps, corridor lighting and EV charging on a shared society meter are supported at ₹18,000 per kW rather than against the household slabs, up to 500 kW for the society.
The 500 kW ceiling counts the individual rooftop plants residents have already installed, and the scheme reckons capacity at up to 10 kW per house. Read the full subsidy guide.
PM Surya Ghar
The current benchmark assistance is ₹30,000 for 1 kW, ₹60,000 for 2 kW, and a maximum ₹78,000 for systems of 3 kW and above. Eligibility is confirmed through the National Portal and your DISCOM.
Scheme valid till 31 March 2027 · Last updated: September 2026. Subsidy amounts and eligibility are subject to prevailing MNRE/DISCOM guidelines.
Read the residential subsidy guideFrom enquiry to switch-on
We estimate the likely capacity before the site visit.
We check shade, structure, access, meter and cable route.
You see the proposed capacity, layout, equipment and scope.
The system is installed, tested and prepared for the utility process.
Net-metering and subsidy steps follow the applicable DISCOM process.
Home solar questions
Share a recent electricity bill. We estimate the first size from your consumption, then confirm it after checking the roof, shade and connection.
It is the maximum central assistance for eligible residential rooftop systems of 3 kW and above. Final eligibility and disbursal depend on the National Portal and DISCOM verification.
We check usable roof area, shade, access, the meter and the cable route. You then receive the proposed size and scope for your home.
A standard on-grid system switches off during a grid outage for safety. If backup is important, tell us during the survey so the suitable system architecture can be discussed.
Free home site assessment
Provide the location of the property and your intended timeline. We will call to confirm the details material to the site.